MATERIAL SAFETY DATA SHEET |
|
|
|
| 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY |
| Product Name: |
MiteX |
| Application: |
Desiccant insecticide for agriculture |
| Company: |
Kiotechagil Ltd. |
| Address: |
Hercules 2, Calleva Park, Aldermaston, Reading, RG7 8DN. |
| Country: |
United Kingdom. |
| Tel/Fax No's: |
| Tel: + 44 (0) 118 981 3333 |
Fax: |
+ 44 (0) 118 981 0909 |
| Emergency Number: out of hours- |
|
+ 44 (0) 1488 608 178 |
| |
|
+ 44 (0) 118 947 4407 |
|
|
| 2. COMPOSITION/INFORMATION ON INGREDIENTS |
Substance: Kieselgur ~ Purified silicate mineral (E 551c)
CAS Number: 61790-53-2
|
| 3. HAZARDS IDENTIFICATION |
None.
However, MiteX does contain free silicates. Ensure that atmospheric dust levels are maintained such that the amount of respirable silicates in the atmosphere is <0.4 mg/M3. Long-term exposure to excessive levels of any mineral dust can lead to respiratory problems.
|
| 4. FIRST AID MEASURES |
| Eye contact: In case of contact with eyes, rinse immediately with plenty of water Inhalation: If strong inhalation of dust occurs it is recommended to clear the airways
|
| 5. FIRE FIGHTING MEASURES |
| Non-Flammable
|
| 6. ACCIDENTAL RELEASE MEASURES |
Personal precautions: Wastes are not classified as hazardous
Environmental precautions: None
|
| 7. HANDLING AND STORAGE |
| Handling: |
Common care and ensure low dust levels. |
| Storage: |
Store in clean dry conditions. Keep container closed and ensure label is intact and legible |
|
| 8. EXPOSURE/PERSONAL CONTROL |
| Engineering Measures: |
N/A |
| Control Parameters: |
None |
| Personal protection equipment: |
|
| |
At high dust levels and/or workers suffer from
dermatitis or sensitive skin
S36 Wear suitable protective clothing |
|
| 9. PHYSICAL AND CHEMICAL PROPERTIES |
| Appearance: |
Beige / Grey powder |
| Odour: |
None |
| pH |
~ pH 4.5 |
| Boiling point: |
N/A |
| Melting point: |
>1000oC |
| Flash point: |
N/A |
| Explosive properties: |
Non-explosive |
| Vapour pressure: |
N/A |
| Relative density: |
325 g/l |
| Solubility: |
Generally insoluble in common solvents |
|
| 10. STABILITY AND REACTIVITY |
MiteX is chemically inert to all fluids with the exception of hydrofluoric acid.
Conditions to avoid: None
Materials to avoid: Hydrofluoric acid
|
| 11. TOXICOLOGICAL INFORMATION |
Non-toxic.
Excessive exposure to dust may affect susceptible persons as follows:
Skin contact: Mild irritation
Eye contact: Mild irritation
|
| 12. ECOLOGICAL INFORMATION |
MiteX is an environmentally compatible material.
|
| 13. DISPOSAL INFORMATION |
Disposal Considerations
Disposal must be in accordance with local and national legislation.
Dispose of through an authorised waste contractor to a licensed site.
Provided care is taken to inhibit airborne dust, normal factory disposal procedures may be employed using skips and tips, then landfill. Spillages may be swept up. The use of water is not recommended; surfaces coated with wet material would be a slipping hazard.
|
| 14. TRANSPORT INFORMATION |
No special precautions, other than dry conditions, are necessary.
|
| 15. REGULATORY INFORMATION |
| LABEL FOR SUPPLY: |
| |
NONE |
| RISK PHRASES: |
None. However, workers should be informed of the presence of crystalline silica and be trained in the proper use and handling of this product as required under applicable regulations. |
| SAFETY PHRASES: |
S22 Do not breathe dust
S26 In case of contact with eyes, rinse immediately with plenty of water
S36 Wear suitable protective clothing (susceptible persons and in dusty conditions) |
STATUTORY INSTRUMENTS: |
Health and Safety at Work Act 1974.
Chemicals (Hazard Information and Packaging for supply)
Regulations 1994.
Control of Substances Hazardous to Health Regs 1988 (Si 1657).
Environmental Protection Act 1990. |
| CODES OF PRACTICE: |
Waste management: The duty of care. |
| GUIDANCE NOTES: |
Health and Safety Executive:-
Occupational exposure limits (EH 40/94)
Classification, Packaging and Labelling of Dangerous
Substances Regulations 1984 |
|
16. OTHER INFORMATION |
Recommendations/restrictions:
It is important to follow the instructions detailed in the Product Data Sheet. If this product is for resale, ensure that the purchaser receives a copy of this information. The information herein is believed to be correct as of the date hereof but is provided without warranty of any kind. The recipient of our product is responsible for ensuring that, where applicable, existing laws and guidelines are observed. |
